Description: The DroneCode Probe (Drone Code Probe) is a generic JTAG / SWD + UART console adapter compatible with most ARM Cortex based designs and in particular with hardware maintained by the DroneCode project. It is supported on all operating systems (Windows, Linux, and Mac OS). A variety of connectors on the DroneCode Probe allow for instant hardware connectivity to the Pixhawk autopilot series, eliminating the need for intermediary boards, adapters, soldering and crimping.


Based off of the open-source Black Magic Probe, the DroneCode Probe offers the following added value:

  • Firmware compatible to the Black Magic probe
  • Does not require OpenOCD or other software to run GDB on Windows, Linux or Mac OS
  • Better setup / usage experience compared to other JTAG probes
  • Integrated 3.3V serial adapter for console access
  • Solder-free support for common DroneCode cabling options:
    • ARM Mini 10 position standard header
    • DCD-S: DroneCode Debug connector, small
    • DCD-M: DroneCode Debug connector, medium
    • 6-pos DF13 console cable (Pixhawk 1.x)


Designed by: Zubax Robotics

Manufactured by: Titan Elite, Inc. 

Kit Contents:

When you purchase the DroneCode Probe kit, you will receive the following items -

  • One (1) DroneCode Probe Board

  • One (1) JST SH 6-Position (6-Pin), Male-to-Male Jumper Cable, 30cm - For use with the DCD-M (DCD Medium) Debug Port

 

Features:

  • Supported targets (see the Black Magic Probe homepage for thefull list of supported targets):

    • STMicroelectronics STM32 series

    • Microchip / Atmel SAM series

    • NXP LPC series

    • Freescale Kinetis

    • Texas Instruments LM / TM series

    • Silicon Labs EFM32 / EZR32

    • Xilinx Zynq-7000

    • Broadcom BCM2836

  • Embedded GDB server on the device. No host-side driver needed (this is unlike, for example, OpenOCD).

    • Loading the application into flash or RAM

    • Real-time execution and single-stepping

    • Hardware assisted breakpoints andr ead/write/access watchpoints

    • Software breakpoints when executing from RAM

  • Simple integration with development tools and IDE

  • Connectors are compatible with the Dronecode Autopilot Connector Standard

  • Optional +3.3 V power supply delivery to the target


Compatible Accessories (not included):

 

Resources:

Zubax DroneCode Probe JTAG / SWD + UART Console Adapter Kit

  • $65.00


Available Options


×

Shipping Estimate

Applies to this product only
Country:
Region / State:
Post Code:

Related Products

Zubax GNSS 2 Micro USB Cable, 1 Meter

Zubax GNSS 2 Micro USB Cable, 1 Meter

Zubax GNSS 2 Micro USB Cable Connection types: Micro-B to USB-A ..

$4.79

Zubax Robotics UAVCAN Micro Termination (Terminator) Plug, JST GH Version

Zubax Robotics UAVCAN Micro Termination (Terminator) Plug, JST GH Version

Zubax Robotics AccessoryItem: Zubax UAVCAN Micro Termination Plug with JST GH connectorVers..

$1.99

Zubax Robotics Babel, USB-CAN, UART-CAN Adapter

Zubax Robotics Babel, USB-CAN, UART-CAN Adapter

Designed by: Zubax Robotics (www.Zubax.com) Applications: Standalone device or embeddable modul..

$59.00

Zubax Robotics UAVCAN JST GH to DF13 Cable, 30 cm

Zubax Robotics UAVCAN JST GH to DF13 Cable, 30 cm

The UAVCAN to DF13 cable facilitates a connection between the Zubax product and a Pixhawk Auto..

$6.25

Zubax Robotics UAVCAN JST GH to JST GH Patch Cable, 20 cm

Zubax Robotics UAVCAN JST GH to JST GH Patch Cable, 20 cm

This UAVCAN Micro JST GH to JST GH cable facilitates a connection between each UAVCAN product. This..

$4.25